Weather Meter Hookup Guide
Contributors:
Toni_K
Toni_K Introduction
Weather stations require specialized sensors to accurately measure and report on weather conditions. For all of your DIY weather project needs, we have the Weather Meters!
These meters allow you to measure wind speed, wind direction, and rainfall easily over RJ-11 connections.
Required Materials
To follow along with this project tutorial, you will need the following materials:
- 1x Weather Meter kit
- 1x Phillips Head screwdriver
- 1x Flathead screwdriver (optional)
Suggested Reading
If you aren't familiar with the following concepts, we recommend checking out these tutorials before continuing.
Analog vs. Digital
This tutorial covers the concept of analog and digital signals, as they relate to electronics.
Data Types in Arduino
Learn about the common data types and what they signify in the Arduino programming environment.
Reed Switch Hookup Guide
Magnetically-actuated reed switches are the perfect component for non-contact proximity sensors. This tutorial provides a quick overview and example hook up.