Touch Potentiometer Hookup Guide
Contributors:
Joel_E_B
Joel_E_B 
Resources and Going Further
Thanks for reading! Here are all the resources mentioned throughout the tutorial.
- Touch Potentiometer Product Page @ danjuliodesigns.com
- Schematic (PDF)
- Eagle Files (ZIP)
- AD5262BRU Datasheet (PDF)
- User Manual (PDF)
- Touch Pot Utility Application
- Source Code (ZIP)
- Digital Potentiometer AD5262BRU Datsheet
- Touch Potentiometer GitHub Repository
- SparkFun Product Showcase: Touch Potetiometer Desk Lamp
For more Capacitive Touch fun, check out the other great SparkFun tutorials.
AT42QT101X Capacitive Touch Breakout Hookup Guide
Learn how to use the simple SparkFun AT42QT1010 and AT42QT1011 capacitive touch breakout boards.
Raspberry Pi Stand-Alone Programmer
This tutorial will show you how to use a headless Raspberry Pi to flash hex files onto AVR microcontrollers as a stand-alone programmer. It also tells the story about production programming challenges, how SparkFun came to this solution, and all the lessons learned along the way.
Variable Load Hookup Guide - Revised
This tutorial will show you how to assemble and use SparkFun's Variable Load board. It can be used to test stability of the power supply under various loads, battery lifetime, safety cutoffs, and other design elements of power supplies under test.
Capacitive Touch Slider (CAP1203) Hookup Guide
An easy and Qwiic way to add capacitive touch to any of your projects using the CAP1203! In this guide, we go over how to connect and set up your Capacitive Touch Slider so you can start playing with it right away.