SparkFun GPS Breakout - XA1110 (Qwiic) Hookup Guide

Contributors: Englandsaurus
Favorited Favorite 5

Hardware Assembly

If you haven't yet assembled your Qwiic Shield, now would be the time to head on over to that tutorial. With the shield assembled, Sparkfun's new Qwiic environment means that connecting the sensor could not be easier. Just plug one end of the Qwiic cable into the XA1110 breakout, the other into the Qwiic Shield and you'll be ready to upload a sketch and figure out where you are. It seems too easy, but thats why we made it this way!

XA1110 plugged into shield