Qwiic GRID-Eye Infrared Array (AMG88xx) Hookup Guide
Contributors:
Englandsaurus
Resources and Going Further
Thanks for reading! Now that you've successfully got your Grid-EYE up and running, it's time to incorporate it into your own project! We're excited to see what you build with the Grid-EYE. If you're left needing more Grid-EYE-related documentation, check out some of these resources:
- Schematic (PDF) -- PDF schematic of the Grid-EYE Breakout board.
- Eagle Files (ZIP) -- PCB design files for the Grid-EYE Breakout.
- Datasheet (PDF) -- Loads of information about the Grid-EYE's electrical characteristics, registers, communication specifications, and more.
- Qwiic Landing Page
- GitHub Repos
- Product Repo -- Design files and example code all related to the Grid-EYE.
- Library Repo -- Arduino Library
- SFE Product Showcase
Need some inspiration for your next project? Check out some of these related tutorials:
FLIR Lepton Hookup Guide
See the invisible world of infrared radiation using the FLIR Dev Kit and Raspberry Pi.
MLX90614 IR Thermometer Hookup Guide
How to use the MLX90614 or our SparkFun IR Thermometer Evaluation Board to take temperatures remotely, over short distances.
Or maybe mirror heat signatures with addressable WS2812 LEDs:
Example code for the demo can be found in GitHub Gist - GridEye LED Array Demo
Or check out this blog post for more ideas!