Comments: Qwiic Atmospheric Sensor (BME280) Hookup Guide

Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Hi there,

    I have connected my sensor to the I2C bus of a SparkFun ESP32 Thing thorough breakout pins. The problem is that this sensor has not been found.

    Has anyone had this problem so far?

    • Hi there, it sounds like you are looking for technical assistance. Please use the link in the banner above, to get started with posting a topic in our forums. Our technical support team will do their best to assist you.

      That being said, double check your wiring and please keep in mind that the ESP32 utilizes a different library for I2C communication. I suggest testing with an ATmega328 based RedBoard or Uno first; as laid out in the examples and is known to work.


If you've found a bug or have other constructive feedback for our tutorial authors, please send us your feedback!