How to Use a Hot Air Rework Station
Contributors:
Joel_E_B, 
bboyho, Ell C
Joel_E_B, bboyho, Ell C 
Resources and Going Further
If you have any questions or comments, please feel free to drop them in the comments box below. Happy reworking!
For more information about the hot-air rework station, check out the resources below:
- 303D Manual
- SMD How To - 4: Rework with hot-air = Good
- SMD How To - 8: How does hot air rework actually work?
Check out these other great tutorials from Sparkfun to level up your skills!
How to Solder: Through-Hole Soldering
This tutorial covers everything you need to know about through-hole soldering.
Using EAGLE: Board Layout
Part 2 of the Using Eagle tutorials, this one covers how to lay out a board after designing a schematic.
Make Your Own Fritzing Parts
Learn how to create your own Fritzing part so you can make amazing looking wiring diagrams, learn about schematics and PCB design, and get your design fabbed into a real PCB with Fritzing's PCB manufacturing service.
How to Install CH340 Drivers
How to install CH340 drivers (if you need them) on Windows, Mac OS X, and Linux.
Or check out this blog post for more ideas to reflow solder!