How to Upgrade Firmware of a u-blox GNSS Receiver

Contributors: Nate

Introduction

For GNSS positioning, u-blox has some of the most incredible receivers available. Over time they will release new versions of the firmware running on those receivers. This tutorial will demonstrate how to upgrade the firmware on the ZED-F9P but can be used for nearly all u-blox receivers including:

• ZED-F9P
• RTK Surveyor (uses the ZED-F9P)
• RTK Express (uses the ZED-F9P)
• RTK Express Plus (uses the ZED-F9R)
• RTK Facet (uses the ZED-F9P)
• ZED-F9R
• NEO-M8P-02
• NEO-M8U
• NEO-M9N
• SAM-M8Q
• ZOE-M8Q