Comments: Getting Started with MicroMod

≡ Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Mynasru / about 4 years ago / 1

    Pin 17 in the pinout table states UART_RX1 (O), I think this must be UART_TX1 (O)

    • Ell C / about 4 years ago / 1

      Sharp eyes! It's fixed - thank you for the heads up!

If you've found an issue with this tutorial content, please send us your feedback!