Garmin LIDAR-Lite v4 (Qwiic) Hookup Guide

Pages
Contributors: Santa Claus Impersonator, MAKIN-STUFF
Favorited Favorite 0

Hardware Assembly

With the Qwiic connector system, assembling the hardware is simple. All you need to do is connect your Garmin LIDAR-Lite v4 (Qwiic) to the RedBoard Qwiic with a Qwiic cable. Otherwise, you can use the I2C pins of your microcontroller; just be aware of logic levels.

Hardware assembly with RedBoard Qwiic
RedBoard Qwiic connected the Qwiic LIDAR-Lite v4 with a Qwiic cable.