Comments: BlackBerry Trackballer Breakout Hookup Guide

Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #1181207 / about 6 years ago / 1

    Hello,

    I have the older COM-09320 version of this product and I'm having trouble getting the provided code to work.

    Even though I copied the wiring scheme exactly as it appears in the tutorial, the initial LED flashing sequence appeared as: white green blue red instead of the coded: white green red blue; The serial monitor is also acting strangely compared to the shown screenshot, without touching the breakout board at all, nothing is depressing the button, etc, this is what my serial monitor looks like:

    Trackball Position:      X-Position= 0   Y-position= 0
    

    Click Trackball Position: X-Position= 0 Y-position= 0 Click Trackball Position: X-Position= 0 Y-position= 0 Click Trackball Position: X-Position= 0 Y-position= 0 Click Trackball Position: X-Position= 0 Y-position= 0


If you've found an issue with this tutorial content, please send us your feedback!