Artemis Development with Arduino

Contributors: Nate, Ell C

Resources and Going Further

• Want to implement the Artemis module into your own design? Checkout the tutorial Designing with the Artemis Module as well as the Artemis Integration Guide.
• Are you more comfortable with a make file and an IDE? Checkout the tutorial on how to setup the Ambiq Apollo3 SDK.

And lastly, Artemis has been designed and proven to work with our entire range of 50+ Qwiic boards. Be sure to checkout and get inspired by what's possible by just plugging in the sensors and outputs you need to build something amazing!

SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic)

GPS-18037

The SparkFun MAX-M10S Breakout is an ultra-low-power, GNSS board that is perfect for battery operated applications that don't…

$45.95

SparkFun GNSS Correction Data Receiver - NEO-D9S (Qwiic)

GPS-19390

The SparkFun NEO-D9S GNSS Correction Data Receiver is a satellite data receiver for L-Band correction broadcast.

$59.95

SparkFun Pressure Sensor - BMP384 (Qwiic)

SEN-19662

The SparkFun Qwiic Pressure Sensor features the BMP384 and excels at high-resolution measurements (up to 21-bit).

$14.95

SparkFun OpenLog Data Collector with Machinechat - Base Kit

KIT-20673

The Base version of the SparkFun OpenLog Data Collector Kit with Machinechat is an easy way to organize and display your data…

$244.95