SparkFun gator:RTC Hookup Guide
Contributors:
santaimpersonator, 
Englandsaurus
Englandsaurus Resources and Going Further
For more product information, check out the resources below:
- Schematic (PDF)
- Eagle Files (ZIP)
- RV-3028 Datasheet (PDF)
- RV-3028 Application Note (PDF)
- gator:RTC PXT Package
- GitHub Product Repo
- Dimensions (PDF)
- micro:bit Landing Page
- SFE Product Showcase
Interested in the micro:bit? Check out some of these other micro:bit products:
Need some inspiration for your next project? Check out some of these other micro:bit product tutorials:
How to Load MicroPython on a Microcontroller Board
This tutorial will show you how to load the MicroPython interpreter onto a variety of development boards.
SparkFun gator:particle Hookup Guide
The gator:particle is an I2C heart-rate monitor and pulse oximeter that can be used as a particle sensor. This tutorial will get you started using the gator:particle with the micro:bit platform.
SparkFun gator:UV Hookup Guide
The gator:UV is an I2C based UV sensor. This tutorial will get you started using the gator:UV with the micro:bit platform.
Wireless Remote Weather Station with micro:bit
Monitor the weather without being exposed to it through wireless communication between two micro:bits using the radio blocks! This is useful if your weather station is installed in a location that is difficult to retrieve data from the OpenLog. We will also explore a few different ways to send and receive data.