Comments: smôl ESP32 Hookup Guide

≡ Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • seulater / about 5 years ago / 1

    smol is a good idea, but it fails because there are no mounting holes. Even a 2-56 size hole would have helped. Not sure what the designers were thinking how they are to be held down. Duck tape?

    • PaulZC / about 5 years ago / 1

      Hi @seulater, The brief for smôl was to keep the boards as small as possible. The lack of mounting holes is quite deliberate - adding those would have increased the size of the boards. The mounting method will depend on the application - for wildlife tracking the boards are likely to be encapsulated. Best wishes, Paul

If you've found an issue with this tutorial content, please send us your feedback!