Comments: Si4703 FM Radio Receiver Hookup Guide

Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #1441770 / about 6 years ago / 1

    hi I tried the sketch but it does not work rds. In the instructions are listed the connections of the ports GPIO 101 and 102, in the file .ino of the example the pins are not configured via software ....

  • Member #915431 / about 7 years ago / 1

    Thank you very much for this guide. I need a help very urgent. please help me I need to use frequency 76 - 108Mhz, But Your code works in 88 - 108Mhz. I need to use from 77Mhz. I don't know how? Help me with the Code. ASAP!


If you've found an issue with this tutorial content, please send us your feedback!