Comments: Serial Controlled Motor Driver Hookup Guide
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
If you've found an issue with this tutorial content, please send us your feedback!
Hello,
I am trying to do Example 2 using Arduino Pro Mini. My problem is that the call myMotorDriver.begin() is never returning the correct value, and so the code is stopping in the loop returning "ID mismatch, trying again". The first value returned is 0xF, after 0xF9 and then is always 0xF8.
I would appreciate if someone could help me if this issue.
Thanks!
Where can I find the fritzing part?
This can be found in our Fritzing Github Repo.