Comments: Qwiic IR Array (MLX90640) Hookup Guide

≡ Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #1549595 / about 5 years ago / 1

    Could not get this to work. It worked with the Pimoroni MLX90640.

  • Member #1529798 / about 5 years ago / 1

    I think the libraries have been updated, but still no luck getting the examples to run on my teensy 3.5

    • Member #1561398 / about 5 years ago / 1

      Have you gotten any results yet?

    • santaimpersonator / about 5 years ago / 1

      Hi there, it sounds like you are looking for technical assistance. Please use the link in the banner above, to get started with posting a topic in our forums. Our technical support team will do their best to assist you.

  • Member #1539758 / about 5 years ago / 1

    Did it work for you?

    • santaimpersonator / about 5 years ago / 1

      Hi there, it sounds like you are looking for technical assistance. Please use the link in the banner above, to get started with posting a topic in our forums. Our technical support team will do their best to assist you.

  • Member #1484414 / about 6 years ago / 1

    I tried it with teensy 3.5 and 3.2. not getting any data. Also tried running 12c scanner. not working

    • santaimpersonator / about 5 years ago / 1

      Hi there, it sounds like you are looking for technical assistance. Please use the link in the banner above, to get started with posting a topic in our forums. Our technical support team will do their best to assist you.


If you've found an issue with this tutorial content, please send us your feedback!