Comments: MPU-9150 Hookup Guide

Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #1697255 / about 2 years ago / 1

    Hi, first of all thanks for the tutorial ! However I understood that the acceleration was measured in g and not in m/s/s, is it normal that at the last step of the tutorial, the monitor returns such high values for the acceleration ?

  • First off, thanks for the great tutorial and sample code/library. But why is the output stopping after a few seconds? Am I missing something obvious?

    • .Brent. / about 8 years ago / 1

      Unfortunately that IC has gone EOL, and we ran out of stock. That means I can't try and reproduce the error. I didn't write our code, and the engineer who did based it off of this repository. There have been changes to the source repository since our release. Maybe you can find something helpful in there. Maybe look through the issues and the pull requests for something related to what you are seeing.


If you've found an issue with this tutorial content, please send us your feedback!