Comments: MicroMod Weather Carrier Board Hookup Guide
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
If you've found an issue with this tutorial content, please send us your feedback!
I try to complie the code for the weather meter exable with the MicroMod ESP32 Processor and always, i get the message "conflicting declaration int LED_BUILTIN' " can you help me? The same example with the SparkFun MicroMod nRF52840 Processor worked fine. But i need to use Micromod ESP32 processor for the wifi connection.
Hey there,
The example code in this guide was a bit outdated as it included some pin definition calls that are now included in the board files for all MicroMod Processors. We've updated the example in this guide to remove those calls. Make sure you have the latest version of the board definitions installed as well as the library and the code should work for the ESP32 Processor just fine.
Also, just for your information the comment section is not best place to get technical support from us. If you need technical assistance in the future please head over to our Technical Assistance page or the SparkFun Forums for help from our Technical Support team.