MicroMod STM32 Processor Hookup Guide
Contributors:
Alex the Giant, Ell C
Alex the Giant, Ell C 
Hardware Assembly
If you have not already, make sure to check out the Getting Started with MicroMod: Hardware Hookup for information on inserting your Processor Board into your Carrier Board.
Getting Started with MicroMod
October 21, 2020
Dive into the world of MicroMod - a compact interface to connect a microcontroller to various peripherals via the M.2 Connector!
After inserting the MicroMod STM32 processor board into a carrier board, your setup may look like the following:
Go ahead and secure the Processor Board by gently pressing it down and tightening the screw (not too much though).
