MicroMod Machine Learning Carrier Board Hookup Guide
Contributors:
Nate, Ell C
Nate, Ell C 
Resources and Going Further
Want more information on the SparkFun Machine Learning Carrier Board? Check out these links!
- Schematic (PDF)
- Eagle Files (ZIP)
- GitHub Hardware Repo
- Accelerometer Datasheet
- Default PDM Microphone Datasheet
- Microphone 2 I2S Datasheet
MicroMod Documentation:
Looking for some project inspiration using your Machine Learning Carrier Board? The tutorials below can help you get started!
Designing with MicroMod
This tutorial will walk you through the specs of the MicroMod processor and carrier board as well as the basics of incorporating the MicroMod form factor into your own PCB designs!
MicroMod Environmental Function Board Hookup Guide
The SparkFun MicroMod Environmental Function Board adds additional sensing options to the MicroMod Processor Boards. This function board includes three sensors to monitor air quality (SGP40), humidity & temperature (SHTC3), and CO2 concentrations (STC31) in your indoor environment. To make it even easier to use, all communication is over the MicroMod's I2C bus! In this tutorial, we will go over how to connect the board and read the sensors.
MicroMod GNSS Carrier Board (ZED-F9P) Hookup Guide
Easily switch between Processor Boards using the MicroMod ecosystem and get precision down to the diameter of a dime with the ZED-F9P from u-blox using the MicroMod GNSS Carrier Board!
Cellular Function Board - Blues Wireless Notecarrier
Add a global cellular module to your MicroMod project with the SparkFun Cellular Function Board - Blues Wireless Notecarrier. With this Function board you can not only send data to and from your MicroMod project, you can even update the firmware on the STM32 MicroMod Processor.