Lumenati Alien Garden
Contributors:
Dia
Dia 
Resources and Going Further
Need some inspiration for your next LED project? Check out these other great SparkFun tutorials.
LED Robot Pop Up Card
Craft a paper circuit pop up card with a cycling RGB LED, battery, and copper tape.
Button Pad Hookup Guide
An introduction to matrix scanning, using the SparkFun 4x4 Button Pad.
Light Up Your 3D Printer's Bed
Having issues viewing your print in a dark lit room? In this tutorial, we will be using LED strips to light up a print bed's area on a LulzBot 3D printer!
Tinker Kit Circuit Guide
This guide takes you through the basics of building 11 different circuits with the SparkFun Tinker Kit and how to program them using the Arduino IDE.