Comments: Lockitron Hardware Hookup Guide
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
If you've found an issue with this tutorial content, please send us your feedback!
https://cdn.sparkfun.com/r/600-600/assets/learn_tutorials/3/9/3/Lockitron_switch_annotated.png
Another note this is labelled wrong, the Common is on the right not the left, the Normally Closed is of the left (On the Left hand two switches column). However from my prior comment these labels would be correct for the (2 Right hand switches column) as they are reversed. Not the case in the current image labels though as of 20160204 YYYYMMDD.
Good to know, thanks. I'll take a look at the image labels as soon as I get a chance.
https://cdn.sparkfun.com/r/600-600/assets/learn_tutorials/3/9/3/Lockitron_Hook_Up_Guide-09.jpg
Just to note the common wire colour codes are soldered on backwards on half the limit switches in the picture, as the limit switches are flipped in the opposite direction from the left to the right (Not that it matters). As of 20160204 YYYYMMDD.