Hookup Guide for the SparkFun Artemis Thing Plus
Contributors:
Ell C
Resources and Going Further
Did you know you can use the SparkFun Artemis Thing Plus as the starting point of your very own Artemis product? Get the design files from our repo here and edit them using Eagle PCB!
For more information on the RedBoard Artemis and the Artemis module itself, check out the links below:
- Schematic (PDF)
- Eagle Files (ZIP)
- Artemis Module Graphical Datasheet (PDF)
- Arduino Core GitHub
- Artemis Info Page
- GitHub Hardware Repo
- Apollo3 DataSheet (PDF)
- Ambiq
- Apollo3 Pad Map
- CH340E USB to serial IC Drivers
- Artemis Thing Plus Board Dimensions
You've now explored the board, let's get blinking with Arduino! Or perhaps you want to learn a little more about the Artemis module itself. Checkout these tutorials!
Designing with the SparkFun Artemis
Let's chat about layout and design considerations when using the Artemis module.
Artemis Development with Arduino
Get our powerful Artemis based boards (Artemis Nano, BlackBoard Artemis, and BlackBoard Artemis ATP) blinking in less than 5 minutes using the SparkFun Artemis Arduino Core!
Did you know the Artemis is compatible with our Qwiic line? Checkout these products that simply plug in and work!
