Comments: Vernier Photogate
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
If you've found an issue with this tutorial content, please send us your feedback!
When I try toad the sketch, I get this error, which is new to me:
avrdude: no programmer has been specified on the command line or the config file Specify a programmer using the -c option and try again
Any suggestions?
Double-check your Board and Port settings in Arduino. Please email our techsupport if you are still seeing problems with this. You can reach our entire team at: techsupport@sparkfun.com
Can I please get instructions on putting one together. Wiring, schematic, etc..
I ordered all the parts from SparkFun but just now realised that there are no assembly instructions.
Hi -
I wrote this project a while ago. I'd be happy to help you out. Can you send me an e-mail directly at: brian@sparkfun.com.
Email sent
Check out the product pages for each of the products. I believe the screen is doubling as the Arduino. If you still have questions please email techsupport and they should be able to help you out.