Comments: TMP102 Digital Temperature Sensor Hookup Guide


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #1007963 / about 7 years ago / 2

    You can tell Alex Wende that I'll buy him a bucket of Corona's if we ever meet at the local. Your library and code for the TMP102 breakout works like a charm. I was struggling to get it to work with Wire.h, and broke down and checked the library and code on your website, and used it.

    Now, my little project of using the TMP102 I2C to display on two seven-segment displays is up and running.

    Great job!

  • Member #1630562 / about 4 years ago / 1

    So since there are only 4 possible addresses for the TMP102, I can only hook 4 up into a single I2C bus? I was hoping to string together more

  • DRK / about 6 years ago / 1

    Question: Is this compatible with ESP8266? Or is the library micro controller specific? Thanks!

  • Member #895616 / about 7 years ago / 1

    The library is no longer available

If you've found an issue with this tutorial content, please send us your feedback!