Shapeoko Coaster Project
Contributors:
MTaylor
MTaylor 
Finish Work
Finishing work really brings out the design and is pretty easy to do for any woodworking project.
Sand the coaster to your heart's content! I used a medium grit paper in circular motions, and it came out as good as soft wood can.
Ahh, I'll take it!
This Danish oil is applied with a cloth or spounge... or paper towel.
The idea is to apply profusely, let sit for 10-15 minutes in the shade, then wipe off the extra.
The coaster is wiped down to remove the excess stain.
Carefully line the engraving with a brush pen such as this one made by Sakura.