Comments: Shapeoko Assembly Guide

≡ Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • -------------------- Tech Support Tips/Troubleshooting/Common Issues --------------------

    Troubleshooting: Stepper Motor Wiring Diagram

    If your stepper motors are not moving as expected, double check your coil wires before connecting with a multimeter. Also, make sure that each stepper motor's wires are connecting to the correct motor screw terminals on the stepoko.

    Wiring Diagram

    Click the image for a closer look.


If you've found an issue with this tutorial content, please send us your feedback!