Sensor System Hookup Guide

Contributors: MikeGrusin

Introduction

The Sensor System is a sophisticated environmental data recording device. You can use it to record barometric pressure, humidity, temperature, volatile organic compounds (VOC), and equivalent CO2 levels.

This guide will show you how to:

• Set Up the Sensor System Hardware
• Start Recording Environmental Data
• Stop Recording Data

Required Materials

To get your Sensor System up and running, you'll need the following supplies. All of these items (except the computer) are included if you received the Sensor System kit.

• Sensor System
• Qwiic Cable
• SparkFun Environmental Combo Breakout - CCS811/BME280 (Qwiic)
• MicroSD Card
• MicroSD Card Reader (USB Adapter or Full-Size SD Adapter).
• USB Power Supply (Wall Adapter or Battery Pack)
• micro-B USB Cable
• Desktop or Laptop Computer

Quickstart

A printable, one-page quick-start is available here. Please refer back to this guide for full instructions and troubleshooting information.