Comments: Qwiic Shield for Arduino & Photon Hookup Guide


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #618222 / about 2 years ago / 1

    What is the reasoning behind connecting SDA/SCL to A4/A5? This shield does not work with my arduino (Metro M4 Express) without making any modifications to it!

    • CF / about 2 years ago / 1

      That's where SDA and SCL are located on the Uno, eventually we will move the IC2 pins over to the R3 layout locations on the other side of the board when this product gets revised.

If you've found an issue with this tutorial content, please send us your feedback!