Comments: Qwiic pHAT Extension for Raspberry Pi 400 Hookup Guide

≡ Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Eric28 / about 4 years ago / 2

    Running the python sample on a Pi400 with this extension, with a SerLCD and Tmp117 plugged into it... qwiic.list_devices() is reporting: both are "Qwiic 4m Distance Sensor (ToF)"

    What gives?

    • Hi,

      That is a good question. I have not encountered that error before. What Python example are you using specifically?


If you've found an issue with this tutorial content, please send us your feedback!