Qwiic Keypad Hookup Guide

Contributors: QCPete, santaimpersonator
Favorited Favorite 0

Hardware Assembly

With the Qwiic connector system, assembling the hardware is simple. All you need to do is connect your Qwiic Keypad to Qwiic enabled microcontroller with a Qwiic cable. Otherwise, you can use the I2C pins, if you don't have a Qwiic connector on your microcontroller board. Just be aware of your input voltage and any logic level shifting you may need to do.

Example setup with RedBoard Qwiic

Example setup with RedBoard Qwiic.