• Home
  • Tutorials
  • Qwiic Ambient Light Sensor (VEML6030) Hookup Guide

Qwiic Ambient Light Sensor (VEML6030) Hookup Guide

≡ Pages
Contributors: Elias The Sparkiest

Hardware Hookup

This will be an easy one thanks to the Qwiic connectors. Take one end of a Qwiic cable and plug it into your RedBoard Qwiic Board and then take the other end and plug it into the SparkFun Ambient Light Sensor.

This image shows a picture of the SparkFun Ambient Light Sensor connected to a Redboard Qwiic by a Qwiic cable.

View as a single page Next Page →
Arduino Library
← Previous Page
Hardware Overview