Qwiic 6DoF - ISM330DHCX Hookup Guide

Contributors: Ell C

Favorited Favorite 0

Examples

Example 1 - Basic Reading

The first example initializes the 6DoF to communicate over I²C with default settings. Open the example by navigating to File Examples > SparkFun 6DOF ISM330DHCX > example1_basic. Select your Board and Port and click upload.

You can find example one by going to the File menu, then choose examples, SparkFun 6DoF ISM330DHCX, then example1_basic

Open the serial monitor after the upload completes with the baud set to 115200 to watch data print out.

You should see accelerometer and gyroscope readings flashing by

View as a single page Next Page →
Troubleshooting

← Previous Page
Software Setup and Programming