Comments: MicroMod Data Logging Carrier Board Hookup Guide


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Flecko / about 9 months ago / 1

    Does this work with the SAMD51 micromod board? The Batt/3 pin is connected to Vin and on the SAMD51 that pin goes right into A4 with no voltage divider thus exposing it to up to 5V or more. Is this ok?

If you've found an issue with this tutorial content, please send us your feedback!