LED Butterfly Pop Up Card

Contributors: Gella

Step 1: Print Template

Right-click the images below, and choose “Save Link As” to download the templates to your computer. Each file has a circuit template page and a pop up template page.

Print your templates out on cardstock. If needed, adjust your printer's margins, or choose 'Fit to Page' in the print settings. The card template is slightly smaller than the paper, so make sure to cut along the black border for the final card size.

Set the pop up page aside for now. We'll build our circuit first and then assemble the pop up once the electronics are all installed.

Butterfly Template - 2 pages

If you have a Silhouette Electronic Cutter, click here to download a Silhouette Studio file for the pop up layer