Comments: GPS Shield Hookup Guide

≡ Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #750922 / about 9 years ago / 1

    What is the DLINE position? Thank you.

  • Member #640157 / about 10 years ago / 1

    I haven't been able to find any information about how to change the serial pins on this shield. Do I desolder the 2 Dselect jumers and wire them to the pin through-holes next to the headers? Thanks!


If you've found an issue with this tutorial content, please send us your feedback!