Comments: Getting Started with U-Center for u-blox

Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Do you know how to change the config file permanently? I can change the baudrate in U-Center but every time i turn off the ZOE-M8Q the baudrate changes to the default value.

  • HI, thanks for the tutoial on U-center. Unfortunately using U-center V19.06 under Windows 10 Pro the ublox receiver neither appears under COM ports nor under u-blox GNSS Location sensor, rendering it useless. Is there any update or release of U-center for Windows 10 Pro? Hans

    • Hi there, it sounds like you are looking for technical assistance. Please use the link in the banner above, to get started with posting a topic in our forums. Our technical support team will do their best to assist you.

      That being said, we didn't create the U-Center software. It was created and is managed by UBlox; you may need to ask their support.

  • So, it looks like U-Center has changed it's GUI. I can't even find much information on their site about the differences, but notably there is no longer a configuration button and the configuration option that does exist is under view. It is called Generation 9 Configure View and does not seem to do the same things.

  • Thanks for demystifing u-center. “annoying” is an understatement, and a concept extended by u-blox support. The product is amazing once running. A little more help would be appreciated on the configuration commit process, send vs cfg-cfg vs the floppy and gear icon. Where does the change go, and how permanent is it?


If you've found a bug or have other constructive feedback for our tutorial authors, please send us your feedback!