Comments: Electret Mic Breakout Board Hookup Guide


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #1261600 / about 6 years ago / 1

    Does this detect Hertz as well as amplitude?

  • 5hud / about 7 years ago * / 1

    Hi, "The Windbag Alert" circuit isn't working for me. You say the emitter of the transistor connects to GND on the Arduino, yet in your circuit diagram the emitter is connected to GND on the power supply. Can you please clarify how the circuit should be constructed? Thanks. Just to mention, the connections to the mic are the wrong way round.

If you've found an issue with this tutorial content, please send us your feedback!