Comments: Copernicus II Hookup Guide
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
If you've found an issue with this tutorial content, please send us your feedback!
-------------------- Tech Support Tips/Troubleshooting/Common Issues --------------------
High Altitude Balloon Project
To use the Copernicus II in a high altitude project, make sure to set it to AIR mode. Try looking at the datasheet on page 133 and 164 [ http://cdn.sparkfun.com/datasheets/Sensors/GPS/63530-10_Rev-B_Manual_Copernicus-II.pdf ] and this GitHub repository [ https://github.com/AdlerFarHorizons/CopernicusNmeaTerm ] for more information.
One of our old engineers had used it for a HAB launch => [ https://www.sparkfun.com/tutorials/361 ].