Buck Regulator Hookup Guide

Pages
Contributors: Alex the Giant, Ell C

Resources and Going Further

For more information, check out the resources below:

Buck Regulator:

Baby Buck Regulator:

Need some inspiration for your next project? Check out some of these related tutorials:

LilyPad Simple Power Hookup Guide

A basic guide for getting started using the LilyPad Simple Power with LiPo batteries.

Beefcake Relay Control Hookup Guide

This is a guide for assembling and basic use of the Beefcake Relay Control board

IoT Power Relay

Using the ESP32 to make a web-configured timed relay.

Single Supply Logic Level Converter Hookup Guide

The Single Supply Logic Converter allows you to bi-directionally translate signals from a 5V or 3.3V microcontroller without the need for a second power supply! The board provides an output for both 5V and 3.3V to power your sensors. It is equipped with a PTH resistor footprint for the option to adjust the voltage regulator on the low side of the TXB0104 for 2.5V or 1.8V devices.