Comments: SparkFun Qwiic Shield for Thing Plus Hookup Guide
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
The Thing Plus Artemis works just fine with this shield so long as you declare the right I2C bus. You are correct that this shield connects to the secondary I2C bus on the Thing Plus Artemis so to use devices plugged into the Qwiic connectors on this shield call Wire1.begin() in your code instead of Wire.begin().
If you've found an issue with this tutorial content, please send us your feedback!
I don't believe this board will work with a Thing Plus Artemis, correct? The Thing Plus Artemis has a secondary I2C bus connected to the pins this module uses, not the same I2C bus as the Qwiic pins.