Comments: SparkFun Blocks for Intel® Edison - Battery Block


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • s89 / about 9 years ago / 1

    Is there a way to detect when the charger cable is connected? I’d like to use that in my program to start a high-power script that only needs to run once a day.

  • Tech Support Tips/Troubleshooting/Common Issues

    The large ground planes make it hard to rework battery on the board because it acts like a large heat sink. With patience and the correct tools, you can change the battery out but it will be hard.

  • rayjan / about 9 years ago / 1

    is it possible to query the state of charge via i2c or similar?

If you've found an issue with this tutorial content, please send us your feedback!