Comments: SparkFun Blocks for Intel® Edison - ADC V20


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #404279 / about 8 years ago / 1

    Hi, can I just power the Intel Edison directly using the ADC block 3.3v instead of stacking multiple blocks just to power the Intel Edison?

    • SFUptownMaker / about 8 years ago / 1

      No. The 3.3V pin on the ADC block header is an output only, created by a 3.3V regulator. Applying a voltage there won't backfeed the rest of the Edison and may in fact cause damage to the ADC board.

If you've found an issue with this tutorial content, please send us your feedback!