Comments: RETIRED - Exploring XBees and XCTU

≡ Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #592018 / about 10 years ago / 1

    If I want one device to be able to communicate with two others individually is there a way to do this? Currently I am running the command mode (+++) and changing the destination each time then writing the configuration. This doesn't seem efficient or correct. Also is there a way to know which device a message came from?

  • -------------------- Tech Support Tips/Troubleshooting/Common Issues --------------------

    Here are some more things to look out for when troubleshooting your XBee:

    Common XBee Mistakes http://www.faludi.com/projects/common-xbee-mistakes/

  • Member #565228 / about 11 years ago / 1

    Heloo PLEASE Help i bought xbee series 2 modules and there is no tutorial how to even blink 2 leds, there is a tutorial on youtube for a single led but i dnt know how to change the code to blink 2 forget that can you tell me how to run a motor with xbee series 2 how to send pwm signals??


If you've found an issue with this tutorial content, please send us your feedback!