Marquee Party Bag
Feldi 
Hardware Assembly
To build your own Marquee Party Bag at home, you will need to collect all of your supplies fist.
The following diagram illustrates the circuit we will be putting together visually.
Start by plotting out the position of your three matrices.
Solder the matrices in a row according to the Fritzing diagram above. I used all black wires to make them as invisible as possible.
When you finish this step, your three matrices should look like this:
Use your hot glue gun to glue the matrices onto the front of your bag.
Bend the three hook up wires from the first matrix around to the inner flap of the bag, and solder your connections according to the Fritzing Diagram above.
This inside flap of your bag should look something like this when you are done:
Now our circuit is done, and it's time to move onto programming.