Little Soundie Audio Player Hookup Guide

Pages
Contributors: LightningHawk
Favorited Favorite 2

Assembly Tips

Very minimal assembly is required to get started.

Breadboard, little soundie, two sets of male headers

To connect the Little Soundie's 6 I/O pins to external components, apply power, connect audio out, and use the VS1000D programming pins, you'll need to do some soldering. It is much easier to solder when the headers are placed in the breadboard.

Soldering on the breadboard

For a flat project like a birthday card or a wearable gauntlet I'd recommend soldering the right angle headers instead.

Little Soundie with right angle headers