Comments: Interactive Hanging LED Array

Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Could you please tell us which LEDs you were exactly using in the project? I would also like to use high power LEDs with the TLC5940 breakout board, but am confused about the maximum current for one pin, when all pins are used with maximum brightness.

  • Isnt the max current for the LED driver IC limited to 120mA in total. Can i turn on all the channels simultaneously?


If you've found a bug or have other constructive feedback for our tutorial authors, please send us your feedback!