Comments: Arduino Comparison Guide
Looking for answers to technical questions?
We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.
If you've found an issue with this tutorial content, please send us your feedback!
For a comparison video, try looking at our SparkFun Arduino Comparison Guide by Shawn https://www.youtube.com/watch?v=hjRSwBcLcSU. =)
I need to use Freqmeasure on the Pro-Micro 5 V. On a UNO R3, that can only be done with the input on Pin 8. Is there a similar restriction on the Pro-Micro and, if so, which pin is used? Thanks.