Comments: SparkFun Blocks for Intel® Edison - GPIO Block

Pages

Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • Member #708977 / about 7 years ago / 1

    Any suggestions on how to change the pinmode to UART? I am using Eclipse C++ and want to read NFC tags using Grove NFC v1.1 http://www.seeedstudio.com/depot/Grove-NFC-p-1804.html

  • Member #671056 / about 8 years ago / 1

    MRAA pin mapping: http://iotdk.intel.com/docs/master/mraa/edison.html

  • Member #145390 / about 8 years ago / 1

    Any chance to add basic PWM to this tutorial...having a heck of a time getting anything to work with the GPIO block PWM pins.

    • Member #654789 / about 7 years ago / 1

      I'm trying to do the same and not having any luck, did you manage to get this to work?


If you've found a bug or have other constructive feedback for our tutorial authors, please send us your feedback!