Comments: General Guide to SparkFun Blocks for Intel® Edison


Looking for answers to technical questions?

We welcome your comments and suggestions below. However, if you are looking for solutions to technical questions please see our Technical Assistance page.

  • OrganicOyster / about 8 years ago / 1

    Hi, do you know what is the value of the parasitic inductance created by all the tracks/vias/connectors ? What block limit do you advise for high speed signals ? Is there an order to respect for the blocks ? Thanks

    • Member #826249 / about 8 years ago / 1

      I'm wondering some of this also. The hookup guides have been useful as far as individual boards go ... but if you were to stack like the entire Starter Pack, Sensor Pack, PWM, and UART all together ... theres bound to be ones that don't jive because of pin count or something. And as you mentioned ... that's potentially a lot of interconnect and possibly signal loss?

If you've found an issue with this tutorial content, please send us your feedback!